ProSurfacesSystemsPS.06
Specification item
Coloured multilayer resin system capable of forming a continuous, smooth film with a scratch-resistant finish and a dry thickness of up to 3 mm. It provides the substrate with high chemical resistance, ease of cleaning, and excellent resistance to trolley and vehicle traffic.
Technical specifications
Certifications
Application
The application cycle in 5 steps. The drawing shows each layer as it goes down.
Step 1 / 5
Primer on mesh
Apply the first coat of filled epoxy resin primer EPOXITE PR100-T, diluted with 20% water, over PRONET 100 mesh previously positioned on the surface using a roller.
Step 2 / 5
Filling skim coat with sand broadcast
Fill the PRONET100 mesh with sand-loaded filled epoxy resin EPOXITE PR100-T applied with a trowel. While still fresh, broadcast PROQUARZ 04 sand to excess.
Step 3 / 5
First self-levelling coat
Apply the first coat of coloured breathable self-leveling epoxy resin EPOXITE RA200 using a V-notched trowel with 6 mm teeth.
Step 4 / 5
Second self-levelling coat
Apply the second coat of coloured self-leveling epoxy resin EPOXITE RA200 using a smooth trowel.
Step 5 / 5
Two coats of clear finish
Apply two crossed coats of transparent scratch-resistant acrylic-urethane varnish POLIUTEK VF 100/200/300-T using a roller or plastic trowel.
Products in this system 3
Information on PS.06 Sistema 06
Cycles, coverage, samples: write to us and we will reply with the right system for your job site.
