ProSurfacesSystemsPS.11
Specification item
Waterproof, UV-resistant and non-slip coating system, perfect for high-quality flooring in indoor and outdoor environments, with a multicoloured decorative effect created using special coloured particles called Color Flakes. Ideal for quickly coating cementitious or industrial screeds. The system provides resistance to medium-high traffic and excellent performance such as resistance to water stagnation, frequent foot traffic, resistance to sub-zero temperatures, and high chemical resistance to staining substances.
Technical specifications
Application
The application cycle in 3 steps. The drawing shows each layer as it goes down.
Step 1 / 3
Epoxy primer
Application of a medium-pile roller coat of VITROX RA500-T epoxy primer.
Step 2 / 3
Coloured resin with flake broadcast
Application of a coat of colored VITROX RA500-C self-leveling resin to the substrate, using a flat squeegee or trowel to ensure an even and uniform distribution. While the product is still fresh, the selected COLOR FLAKES are lightly broadcast onto the surface.
Step 3 / 3
Two coats of clear finish
Vacuum or remove with a bristle brush all excess COLOR FLAKES that have not adhered to the previously applied colored resin. Subsequently, apply two coats of PURTOP VF300/200-T to the substrate. Apply the first coat using a plastic trowel to completely saturate the chips. Then, once the film is dry (wait a minimum of 12 hours), apply a second coat using a wide brush or a specific roller, taking care to distribute it evenly and uniformly.
Products in this system 2
Information on PS.11 Sistema Flakes
Cycles, coverage, samples: write to us and we will reply with the right system for your job site.
