C.02Cromateria
Floor
Monochromatic colored textured anti-moisture decorative system for walls or floors
Specification item
Multilayer monochromatic textured system to be applied after substrate preparation using a reinforced epoxy-cement smoothing compound that creates a barrier against negative and positive water pressure, prior to applying a double layer of fine-grain micro-resin, protected by an aliphatic polyurethane topcoat that is scratch-resistant, stain-resistant, waterproof and HACCP-certified.
Technical specifications
Application
The application cycle in 6 steps. The drawing shows each layer as it goes down.
Step 1 / 6
Moisture-barrier primer
Roller application of the first coat of the two-component primer CROMATERIA PRIMER ANTIUMIDO.
Step 2 / 6
Mesh-reinforced skim coat
Smoothing of the substrate with embedding of the alkali-resistant fiberglass mesh PRONET 100, using the three-component, fiber-reinforced epoxy-cement mortar CROMATERIA FONDO/INTERMEDIO ANTIUMIDO applied with a flat trowel, for surface leveling and preparation of the substrate for the subsequent layers of the system.
Step 3 / 6
Levelling skim coat
Zero-level smoothing with a flat trowel using the three-component mortar CROMATERIA FONDO/INTERMEDIO ANTIUMIDO.
Step 4 / 6
Two coats of decorative finish
Double decorative finishing coat with CROMATERIA FINITURA 02 or 06 applied with a flat trowel.
Step 5 / 6
Base coat of the protective sealer
Roller application of primer made with CROMATERIA TOP diluted 50% with water.
Step 6 / 6
Two coats of clear finish
Roller or plastic trowel application of two coats of transparent finish made with CROMATERIA TOP.
Products in this system 4
Information on C.02 Floor
Cycles, coverage, samples: write to us and we will reply with the right system for your job site.
