Specification item
Continuous surfacing characterized by exposed natural aggregates, mixed with CROMATERIA STONE DESIGN resin. CROMATERIA STONE DESIGN floors ensure high aesthetic appeal and extensive customization options, achieved through the combination of different shapes, grain sizes, and types/colors of aggregates. Ideal for indoor and outdoor residential environments such as courtyards, villas, condominium spaces, and outdoor areas. The resulting surfaces help limit surface runoff and water pooling, particularly from rainfall, keeping the walking surface as dry and safe as possible. The system is suitable for vehicular traffic and therefore ideal for parking areas.
Technical specifications
Application
The application cycle in 2 steps. The drawing shows each layer as it goes down.
Step 1 / 2
Consolidating primer
Apply, only on friable substrates, one coat of CROMATERIA PRIMER ready to use with a brush or suitable roller on the floor and vertical surfaces involved in the cycle, distributing the product evenly and uniformly.
Step 2 / 2
Laying the resin and pebble mix
Mix the specified amount of CROMATERIA STONE DESIGN resin with the chosen CROMATERIA SASSO LAVATO in a clean and suitably sized container at a 1:15 weight ratio, unless otherwise specified in the technical data sheet or by the CROMATERIA technical service. Place suitable steel side guides on the substrate, with a thickness equal to that of the flooring to be installed, to ensure the correct leveling of the applied layer. Then proceed to spread the mixture using a straightedge, ensuring uniform distribution of the material. Perform the compaction phase on the freshly applied product, either manually or mechanically, until the proper cohesion, flatness, and draining porosity of the surface are achieved.
Products in this system 1
Information on C.07 Stone Design
Cycles, coverage, samples: write to us and we will reply with the right system for your job site.
