Specification item
Multi-layer resin system made with internally fibre-reinforced thixotropic epoxy-cement mortar that allows for the restoration and smoothing of horizontal or vertical substrates when it is necessary to create a barrier against negative and positive moisture pressure before painting with UV-resistant aliphatic polyurethane resin with good resistance to aggressive chemical liquids.
Technical specifications
Application
The application cycle in 5 steps. The drawing shows each layer as it goes down.
Step 1 / 5
Moisture-barrier primer
Application by roller of a first coat of CROMATERIA PRIMER ANTIUMIDO epoxy-cementitious filler.
Step 2 / 5
Mesh-reinforced skim coat
Smoothing of the substrate with embedding of the alkali-resistant fiberglass mesh PRONET 100, using the three-component, fiber-reinforced epoxy-cement mortar CROMATERIA FONDO/INTERMEDIO ANTIUMIDO applied with a flat trowel, for surface leveling and preparation of the substrate for the subsequent layers of the system.
Step 3 / 5
Smoothing skim coat
Second coat applied with a flat trowel, using the three-component, fiber-reinforced epoxy-cement mortar CROMATERIA FONDO/INTERMEDIO ANTIUMIDO, for surface leveling and preparation of the substrate for the subsequent layers of the system.
Step 4 / 5
Two coats of coloured resin
Apply two coats of CROMATERIA PRIMER ANTIUMIDO epoxy-cement filler resin with a roller in the chosen colour.
Step 5 / 5
Clear polyurethane finish
Roller application of one coat of PURTOP VF200/300-T transparent aliphatic polyurethane resin.
Products in this system 3
Information on C.05 In&Out
Cycles, coverage, samples: write to us and we will reply with the right system for your job site.
