WP.04WaterProof
Purain Parking
Multi-layer elastic waterproof system with high drive-over and walkability properties
WaterProofSystemsWP.04
Specification item
Monochromatic, non-yellowing, medium-elasticity waterproof coating for floors, balconies, terraces or walkways where a continuous decorative system with medium-high traffic resistance and excellent performance is required (resistance to UV rays, water stagnation, frequent foot traffic, low temperatures, and chemical resistance to solvents).
Technical specifications
Application
The application cycle in 5 steps. The drawing shows each layer as it goes down.
Step 1 / 5
Primer and perimeter sealing
Apply an even coat of PURAIN PRIMER using a wide brush or specific roller on the floors and vertical surfaces to be waterproofed. Once dry, coat the perimeter surfaces with PROJOINT.
Step 2 / 5
First coat of quartz-filled waterproofing
Mix PURAIN COLOR with 50% by weight of PROQUARZ using a low-speed drill until homogeneous. Apply and spread evenly with a steel trowel.
Step 3 / 5
Second coat with quartz broadcast
Prepare and apply another mixture of PURAIN COLOR with 50% PROQUARZ as in the previous step. While still wet, broadcast PROQUARZ 04 to excess.
Step 4 / 5
Cleaning and primer coat
Remove unbound PROQUARZ 04 by brushing or vacuuming. Apply one coat of PURAIN PRIMER using a wide brush or specific roller.
Step 5 / 5
Two coats of coloured protective finish
Apply two even coats of PURTOP VF200 using a wide brush or specific roller on the treated floors and vertical surfaces.
Products in this system 3
Information on WP.04 Purain Parking
Cycles, coverage, samples: write to us and we will reply with the right system for your job site.
